Adaptive Waffle System
Since I still haven’t been able to upgrade to Windows 11, I am continuing with Rhino 8 and Grasshopper 1. But I think, hopefully, I’ll be able to sort it out soon. In the meantime, I’ll be publishing the last pieces of my remaining archive related to GH 1. Regarding interlocking (waffle) systems, I finally learned how to use the Region Slits component in GH 1, which I had never been able to use until now. I’ve been doing various experiments with these systems for years. Here, I tried an adaptive interlocking system directly through profile curves, without creating a surface. The reason I call it adaptive is that, as you can see in the images, it aligns itself to the surface normal.
Cite this post
Related Posts
Open Nest
July 24, 2023
In this short trial, I will be testing the Open Nest add-on for Grasshopper. The add-on is available in food4rhino as of 2023. For this test, I will use the latest exercise on Interlocking structures I experimented with here. Nesting is an important topic, especially in today’s economic crisis. It reduces the waste materials on laser-cut plates. First, I should re-visit the interlocking structures Grasshopper definition here. The below image is the new definition for the interlocking structure: The new…
Möbius Strip Fabrication
October 31, 2012
The Möbius strip is a famous mathematical object. Although being in three-dimensional space, it is a closed-loop of only one surface and only one edge. This quality alone makes the object an interesting study for computational design. I aimed to create an object to test our new CNC machine. I wanted to test the egg-crate interlocking fabrication method. This is why the study became a Möbius strip fabrication. Apart from its uses in science and technology, here is an interesting…
Testing the Nesting
May 28, 2012
Here I am testing the nesting. RhinoNest is a plug-in for Rhino and a set of components for Grasshopper. I tested it using my old interlocking fabrication definition (here) and (here). I downloaded RhinoNest from this website and installed it. However, I sounded a little complicated at first sight. Then I found a sample definition (here) and modified it a little bit to meet my purposes. First of all, I added orientation components (grey group below) to align all sections to the WorldXY…
Interlocking Structure with Boolean
August 23, 2026
You are seeing the last of the interlocking system trials that I have previously tested in two exercises. If you remember, in our first trial, we were drawing interlocking joinery details on cross-sections using closed curves, without any solid modeling. And here is the most advanced one, I guess. In this exercise, however, we are creating a solid model that incorporates these interlocking details. This time, we will look at how to construct the same system using Boolean operations. Boolean…
Interlocking Pavilion
December 31, 2023
The interlocking frame structures represent a quintessential example of parametric design since very old times. More recently, they gained widespread attention through the Metropol Parasol in Seville, captivating architects and designers. I’ve extensively explored these structures on this blog, attempting various methods like manual slit drawing and solid/region boolean operations. My latest iteration aimed for greater simplicity and adaptability on complex surfaces. I call this new version Interlocking Pavilion. The ribs now align perpendicularly to the surface, which is a…